Hangar 9 SU-26MM Sukhoi Assembly Manual page 28


5. Apply servo/double-sided tape between battery and
ignition module.

6. Glue ¼-inch thick DuBro foam to the bottom of the
battery using CA. Glue a piece of hook and loop to the foam.
28

7. Apply opposite side of adhesive-backed hook and loop
to the engine box.

8. Mount the ignition and battery as one piece and strap
it with hook and loop straps. Provide an overlap of 2 inches
for the strap to wrap around the battery and ignition module
through the slots.

9. Ignition will be mounted next to ignition module
and battery. Glue a piece of hook and loop next to ignition
module and battery.

10. Apply a piece of masking tape to the bottom of
regulator and glue opposite side of hook and loop using CA.
Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual