Hangar 9 SU-26MM Sukhoi Assembly Manual page 26


4. To secure the fuel tank from forward/aft motion,
double-sided or servo tape should be applied to the bottom
of the tank. There is no foaming issue with hard-mounted
tanks in gas engines.
For removable setup, apply a couple of pieces of masking
tape to the bottom of the tank.

5. Glue a piece of hook and loop to the masking tape using
medium CA.
26

6. Glue two pieces of hook and loop to the tank tray using
medium CA.

7. Strap the tank with hook and loop strips provided.
Loop the overflow line around the tank.

8. Overflow line goes through the fuselage floor opening
to the lower bottom cowl.

9. Mount the lower cowl and mark behind the bottom left
louver. Use rotary tool to open the lower cowl, big enough to
pass the overflow line.

10. Cut 1/4-inch fuel line.
Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual