Hangar 9 SU-26MM Sukhoi Assembly Manual page 17

angle slightly swept forward.
Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual

8. Tail gear is mounted using (3) 4-40 ½ inch screws and
3 washers included in the kit.

9. Mount the T-bracket and mark the holes.

10. Drill a pilot hole using a pin vise, then mount the
screws and remove them.

11. Apply thin CA in the holes and wait until it is dry, this
will harden the wall.

12. Mount the T-bracket using small wood screws and
the tail gear using washers and screws; make sure to use
threadlock on the bolts. Hook the springs from the tiller arm
to the T-bracket and secure them.
17