Magnetic Wheel Lock - Permobil C300 Service Manual

Removing the Magnetic wheel lock.
1. Raise the seat; seat elevator to the highest
position; fixed seat tube to the service position.
See page 24. If the seat elevator does not
work normally because the batteries are
discharged or the actuator is defective, the
seat can be raised/lowered
See page 22.
2. Switch off the main power switch on the control
panel.
3. Remove the chassis cover. See page 8.
4. Disconnect the electrical connection of the
magnetic wheel lock. See figure.
5. Unscrew and remove the three screws that
hold the wheel lock in place. See figure.
Fitting the Magnetic Wheel lock
Fit the magnetic wheel lock in the reverse order.
Fit the magnetic wheel lock with the release arm
facing upwards.
manually.
The electrical connections of the wheel locks are
positioned on the inside of the chassis, on
19
Wheel Lock Release
each side of the seat lift/seat post.

Magnetic wheel lock.

The magnetic wheel lock is
fitted with three screws