Manual Release Of The Magnetic Wheel Locks - Permobil F3 Corpus Owner's Manual

Owner's Manual Permobil F3 Corpus

Manual Release of the Magnetic Wheel Locks

The wheelchair is fitted with a manual brake release on each drive wheel that can be released to make it possible to
move the wheelchair manually. The brake release levers are located at the front of the wheelchair.
Release of wheel locks
1. Shut off the wheelchair using the start button on the control panel.
2. Move the levers downwards to release the brakes. The chair can know be moved manually.
Engage the wheel locks
Move the lever upwards so it assumes in its upper most position. Always check that the release levers goes right to its
most upper position.
L
WARNING!
Do not engage or disengage the wheel locks unless power to the chair is off.
In order to avoid the wheelchair rolling away, ensure that the wheelchair is on a level surface before releasing the
wheel locks.
Be aware that the wheelchair will not have brakes when the wheel locks are in free-wheel position.
Make sure that the person pushing the chair has full control when the wheel locks are disengaged.
Always reset the wheel lock release after manually moving the wheelchair.
118
Handling