Seat elevator
Seat elevator
Manual Raising/Lowering of the Seat
elevator
(Applies to Corpus II and PS seats)
If the seat lift does not work normally because the
batteries are discharged or the actuator is
defective, the seat can be raised/lowered
manually.
1. Switch off the main power switch on the
control panel.
2. Remove the cushion and plastic plugs from
the seat.
3. Raise/lower the seat using the seat lift crank
supplied. See figure.
WARNING
Drills must not be used in connection with manual operation of
the seat lift. There is a risk of damage to materials.
Corpus II Seat
22