Magnetic Wheel Lock - Permobil Street Service Manual

Magnetic wheel lock

Removal
1. Raise the seat to its highest position. To raise
it manually, see page 28, 31.
2. Turn off the main power switch on the control
panel.
3. Put the circuit breaker in the "OFF" position;
see page 35.
4. Remove the chassis covers; see page 7.
5. Remove the magnetic wheel lock's electrical
connection; see figure 37.
6. Pull the cable casing forward, out through the
slot in the cable holder and detach the wheel
lock release cable from the magnetic wheel
lock; see figure 38.
7. Remove the three screws that secure the
wheel lock; see figure 39. Note the position of
the wheel lock release lever and rubber seal's
placement to facilitate subsequent reassembly.
Remove the wheel lock with wheel lock disk
and cover.
Fig. 37. Magnetic wheel lock
electrical connection.
Fig. 38. Remove the wheel lock release cable.
Fig. 39. Remove the magnetic wheel lock.
23
Magnetic wheel lock