Magnetic Wheel Lock - Permobil K Service Manual

Wheel Lock Release
Wheel Lock Release
Removing the Magnetic wheel lock.
1. Raise the seat; seat elevator to the highest
position; fixed seat tube to the service position.
See page 26. If the seat elevator does not work
normally because the batteries are discharged
or the actuator is defective, the
be raised/lowered manually. See page 24.
2. Switch off the main power switch on the control
panel.
3. Remove the chassis cover. See page 8.
4. Disconnect the electrical connection of the
magnetic wheel lock. See figure.
5. Unscrew and remove the three screws that
hold the wheel lock in place. See figure.
Fitting the Magnetic Wheel lock
Fit the magnetic wheel lock in the reverse order.
Fit the magnetic wheel lock with the release arm
facing upwards.
seat can
The electrical connections of the wheel locks are
positioned on the inside of the chassis, on
22
each side of the seat lift/seat post.

Magnetic wheel lock.

The magnetic wheel lock is
fitted with three screws