Panasonic KX-NS500 User Manual page 251

To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
1
call log.*
•
This operation is available only for PTs with a display.
•
*1 System programming is required for this operation.
•
*2 After an outside call is made from the Outgoing Call Log, when another call is made using
the REDIAL button, if a name is registered to the Personal/System Speed Dialling entry, the
name is displayed on the LCD of the display PT making the call.
To store the caller's information in personal speed dialling
Display PT
When the desired party is displayed
Press STORE.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
REDIAL
Press REDIAL.
Press Up or Down
until desired name
2
and/or number*
appears.
1.14.1 Using the Call Log
Off-hook.
User Manual 251