Panasonic KX-NS500 User Manual page 151

To change your password
PT/SLT/PS/SIP Extn./S-PS
Log in to your mailbox.
2
Enter 2 to accept.
CAUTION
•
It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.
•
To avoid unauthorised access to the PBX, keep the password secret. If it becomes known
to others, the PBX may be misused.
•
Change the password periodically.
Changing or Deleting Your Subscriber (Owner) Name
You can record your name in the Unified Messaging system. The system can then announce your name for
callers to let them know that they have reached the correct mailbox.
To change/delete your subscriber name
PT/SLT/PS/SIP Extn./S-PS
Log in to your mailbox.
Enter 433 to delete your subscriber name,
then go on-hook to finish.
2
Enter 2 to accept.
Common Service Commands and Navigation Commands
Commands for Changing the Current Unified Messaging System Service
After going off-hook and pressing the MESSAGE button
group's floating extension number, you can enter a service command to access certain Unified Messaging
system features quickly. While guidance is being provided, you can also use service commands to, for example,
switch to a different Unified Messaging system service mode.
*1 For KX-UT series SIP phone and S-PS users: When using the MESSAGE button, please press the MESSAGE button before going
off-hook.
4 2 1
Enter 421.
On-hook.
4 3 1
C.Tone
Enter 431.
On-hook.
1.8.2 Logging in to and Configuring Your Mailbox
your desired password
Enter the desired password and #.
Enter 1 to end recording.
State your name.
, Voice Mail Transfer button, or enter the UM
*1
#
1
User Manual 151