Panasonic KX-NS500 User Manual page 342

3.2.1 User Programming
Automatic Login
item
Auto Login Extension
Auto Login Extension
Password Entry
Requirement
Auto Login Caller ID 1, 2
Auto Login Caller ID
Password Entry
Requirement
Auto Login Toll Saver
342 User Manual
When this item is set to "Enable", you are able to access your mailbox directly
without entering the mailbox number. You can automatically log in from your
extensions, by calling from an outside telephone whose number is stored as
a Caller ID number, or by dialling a telephone number assigned to a specified
DID number or trunk. When logging in from outside telephones, the Toll
Saver feature is also available.
Specifies if a password is required for the Automatic Login Extension feature.
Notice
If this is set to "No", ensure that unauthorised third-parties are not
allowed access to that mailbox.
Specifies the telephone number from which you can automatically be logged
in from. When Caller ID information is received that matches one of these
numbers, the caller (you) is automatically logged in to the mailbox. Note that
this telephone number must be unique for each mailbox.
Specifies if a password is required for entry when automatic login is
performed using the Caller ID of the number set in Auto Login Caller ID 1
or Auto Login Caller ID 2.
Notice
If this is set to "No", ensure that unauthorised third-parties are not
allowed access to that mailbox using the number assigned to Auto
Login Caller ID 1 or Auto Login Caller ID 2.
Allows you to call the Unified Messaging system and know whether or not
new messages have been recorded in your mailbox by the number of rings
you hear before the Unified Messaging system answers your calls. Toll
Saver is available under the same conditions as Automatic Login; you can
use Toll Saver when calling from an outside telephone whose number is
stored as a Caller ID number, or by dialling a telephone number assigned to
a specified DID number or trunk:
•
Disable: Disables the Toll Saver feature.
•
DID: Toll Saver functions when the system receives the preprogrammed
DID number from the PBX.
•
Caller ID: Toll Saver functions when Caller ID information is received
that matches one of the preprogrammed numbers (Caller ID 1 or 2).
•
Trunk: Toll Saver functions when the system receives a call on the
preprogrammed trunk.
Description