Table of Contents
Advertisement
6 CONTROLS
6.9
6.10
6.11
18
Stop button
W00296-10
Combination switch (All EXC‑F SIX DAYS models)
F03761-10
Overview of indicator lights (All EU models)
W00294-10
1
Stop button
is located on the right side of the handlebar.
Possible states
is in the basic position – In this position,
•
The stop button
the ignition circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
•
Stop button
is interrupted, a running engine stops, and a non-running
engine will not start.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when
1
the indicator lamp
STANDARD with TC – STANDARD mapping with trac-
1 TC
tion control is activated when the indicator lamp
and the TC indicator lamp light up.
ADVANCED – ADVANCED mapping is activated when
2
the indicator lamp
ADVANCED with TC – ADVANCED mapping with trac-
2 TC
tion control is activated when the indicator lamp
and the TC indicator lamp light up.
Caution
Voiding of the government approval for road use and the
insurance coverage If the combination switch is mounted,
the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote
from public road traffic if the combination switch is
installed.
The engine characteristic can be changed using button
2
button
on the combination switch.
Traction control can be activated using the TC button
combination switch.
The quick shifter can also be activated via the combination switch.
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
A
lights up.
B
lights up.
1
3
on the
A
B
and
Advertisement
Table of Contents
