Open Burner Cleaning; Oven Interior Cleaning; Stainless Steel Surfaces - Waldorf 800 Series RN8910GE Installation And Operation Manual

Open Burner Cleaning

1. Remove pot stands, burner caps, burner bowls
and pot stand supports from top of cooktop.
Wash with hot soapy water, using a soft
bristled brush. Dry thoroughly with a dry cloth.
Any baked-on deposits can be scraped off
using a scraper tool.
NOTE: Pot stands, burner bowls and pot stand
supports can be washed in a dish
washer. Do Not wash burner caps in
dishwasher.
Burner Body
2. Burner mounting rails should not be removed.
Clean in situ with hot soapy water.
Burner Mounting
3. Clean burner venturi with a bottle brush and
hot soapy water, as required.
Burner Venturi
4. Empty spill tray and wash with warm soapy
water.
5. Dry all components thoroughly and
re-assemble.
Burner Cap
Rail
Pot Stand
Support
Bottle Brush
Cleaning and Maintenance

Oven Interior Cleaning

1. Do not use wire brushes, steel wool or other
abrasive materials to clean oven interior.
2. Clean oven regularly with a good quality
domestic oven cleaner.
3. Weekly - Remove and clean any built up of
grease etc. from oven racks and bottom spill
cover.
4. Dry oven thoroughly with a dry cloth and polish
with a soft dry cloth.

Stainless Steel Surfaces

1. Clean stainless steel surfaces with hot soapy
water and a soft bristled brush.
2. Baked on deposits or discolouration, use a
good quality stainless steel cleaner or stainless
steel wool. Always rub in direction of grain.
17