Electrical Supply Requirements; Electrical Connection - Waldorf 800 Series RN8910GE Installation And Operation Manual

Specifications

Electrical Supply Requirements

MODEL
RN8910GE
RN8910GEC

Electrical Connection

Electrical supply connection point is located at rear of appliance, approximately 80mm from right
hand side, 466mm from rear and 150mm from floor.
When connecting this electric appliance to mains supply, ensure the following is carried out:-
 An isolating switch is fitted within 2m of appliance, but not on appliance and in such a position
that user does not have to reach across cooking surface.
 Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary
polychloroprene or other equivalent synthetic elastomer sheathed cord (as per AS / NZS 3191
part 2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.
 Branch supply line shall be individually overload protected to correct current rating and supply
chord shall be protected against any mechanical or thermal damage.
 A grommet is fitted around wiring entry hole into appliance.
 All wiring connections must be tight.
Refer to appropriate wiring standards for size of cable to be supplied to an appliance for current
drawn on that line.
T
HIS APPLIANCE MUST BE EARTHED
QUALIFIED PERSON IN ORDER TO AVOID A HAZARD
1-Phase Connection
1P+N+E
230-240V
6.5 kW,
26.6 Amps @ 235 V
6.8 kW,
27.9 Amps @ 235 V
Warning
. I
F SUPPLY CORD IS DAMAGED
.
6
3-Phase Connection
3P+N+E
400-415V
L1 - 8.2 Amps
6.5 kW L2 - 9.2 Amps
L3 - 9.2 Amps
L1 - 9.5 Amps
6.8 kW L2 - 9.2 Amps
L3 - 9.2 Amps
,
IT MUST BE REPLACED BY A SUITABLY