Commissioning - Waldorf 800 Series RN8910GE Installation And Operation Manual

Installation

Commissioning

1. Before leaving the new installation;
a. Check the following functions in accordance with operating instructions specified in 'Operation'
section of this manual.
 Light the Open Burners.
 Light the Open Burners.
 Check the Low Fire Burner Operation.
 Check the High Fire Burner Operation.
 Check the Oven Heating.
 Check the Oven Thermostat Operation.
 Check the Oven Fan Operation.
b. Ensure operator has been instructed in the areas of correct lighting, operation, and shutdown
procedure for appliance.
2. This manual must be kept by owner for future reference, and a record of
of Installation
and
details can be found on Rating Plate attached to front right hand corner of bottom sill.
Refer to 'Gas Connection' section).
NOTE: If it is not possible to get the appliance to operate correctly, shut 'Off' the gas supply to the
appliance and contact appliance supplier.
Serial Number of Appliance
(F - Flame Failure Option).
(PF - Pilot and Flame Failure Option).
(GEC Models only).
recorded and kept with this manual.
12
Date of Purchase, Date
(These