Open Burner Cleaning; Griddle Plate Cleaning - Waldorf RN8510GE Installation And Operation Manual

800 series gas ranges electric static/convection oven
Hide thumbs Also See for RN8510GE:
Table of Contents

Advertisement

Open Burner Cleaning

1. Remove pot stands, burner caps, burner bowls
and pot stand supports from top of cooktop.
Wash with hot soapy water, using a soft
bristled brush. Dry thoroughly with a dry cloth.
Any baked-on deposits can be scraped off
using a scraper tool.
NOTE: Pot stands, burner bowls and pot stand
supports can be washed in a dish
washer. Do Not wash burner caps in
dishwasher.
Burner Body
2. Burner mounting rails should not be removed.
Clean in situ with hot soapy water.
Burner Mounting
3. Clean burner venturi with a bottle brush and
hot soapy water, as required.
Burner Venturi
4. Empty spill tray and wash with warm soapy
water.
5. Dry all components thoroughly and
re-assemble.
Burner Cap
Rail
Pot Stand
Support
Bottle Brush
Cleaning and Maintenance

Griddle Plate Cleaning

It is recommended that a flat blade scraper is used
to clean the griddle surface, these are not supplied
with griddle but may be purchased separately.
Refer to 'Replacement Parts List' at rear of this
manual.
T
HE BLADES FITTED TO THE SCRAPER TOOL ARE EXTREMELY SHARP
AND ARE TO BE USED WITH CARE
Always
ensure
applied over whole surface of scraper tool
when using on flat surface of griddle, to
prevent scoring of griddle surface.
NEVER bang sharp edge of scraper tool on
flat surface of griddle as this will damage
the griddle and invalidate the warranty.
1. Clean griddle plate surface thoroughly with a
scraper tool and brush off any deposits with a
soft bristled brush.
2. Stubborn or accumulated carbon deposits can
be removed with a griddle stone or a scotch
bright pad.
3. Wipe down griddle surface with a cloth and
then clean with hot soapy water and a soft
bristled brush. Dry thoroughly with a dry cloth.
4. Occasionally bleach griddle plate with vinegar
when plate is cold.
5. Empty grease tray and wash with warm soapy
water. Dry thoroughly with a dry cloth. Refit
grease tray.
6. Briefly turn 'On' griddle until griddle plate is
dry.
7. Spread a thin smear of cooking oil over griddle
plate to form a protective film.
19
Warning
.
Caution
that
even
pressure
is

Advertisement

Table of Contents
loading

Table of Contents