Removing The Module Holder With Smartcard Reader And/Or Wlan Module - Fujitsu CELSIUS W410 Operating Manual

Removing the module holder with SmartCard reader
and/or WLAN module
► Open the casing (see
► Disconnect the cables connected to the module holder.
► Remove the screws (1).
► Slide the module holder out of the casing in the direction of the arrow (2).
► Remove the SmartCard reader and WLAN module from the module holder (see
the SmartCard reader from the module holder", Page 44
from the module holder", Page
"Installing the module holder with SmartCard reader and/or WLAN module", Page
or
► Remove the SmartCard reader and WLAN module from the module holder (see
the SmartCard reader from the module holder", Page 44
from the module holder", Page
► Close the casing (see
Fujitsu Technology Solutions
"Opening the casing", Page
44) and install the module holder again (corresponds to
44) and install a blind cover in the drive bay.
"Closing the casing", Page
35).
1 1
2
and "Removing the WLAN module
and "Removing the WLAN module
36).
System expansions
"Removing
42).
"Removing
43