2. Sample Program
Sample Program for Debugging
2.1
Start a new Project with Softune Workbench
At first choose an evaluation MCU (here: MB91V230), copy the template project of the "Softune samples" into an
own folder and start the Softune Workbench Software. Please note, that all examples are for demonstration
purpose only. Cypress is not taking over responsibility for any reliability.
"Main.c"
2.2
The following sample code program, based on the standard template project, is used for demonstrating
emulation and debugging. Please change "Main.c" to the following:
FR Family MB2198-01 Emulating and Debugging Installation Guide, Doc. No. 002-05223 Rev. *A
6