Indicators On The Device - Fujitsu CELSIUS W410 Operating Manual

Operation

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
No. indicator
1 Drive indicators
2 Indicator for optional
components, e.g.
SmartCard reader
3 Power-on indicator
4 Hard disk indicator
During operation, an optical light guide also lights up above the USB
and audio ports on the front of the device.
22
Description
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
The indicator lights up when the optional component, e.g. the
SmartCard reader, is accessed.
Caution: In energy-saving mode the device must not be switched
off with the main power switch (if present) or disconnected from
the mains, as this may result in data loss.
• The indicator lights up white:
The device is switched on.
• The indicator flashes white (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains). If the
device is ready it can be switched on with the ON/OFF switch.
The indicator lights up blue when the hard disk drive of the device
is accessed.
1
2
3
4
Fujitsu Technology Solutions