Installing The Memory Card Reader; Removing The Memory Card Reader - Fujitsu CELSIUS W410 Operating Manual

Installing the memory card reader

► Push the memory card reader into the casing in the direction of the arrow (1).
► Fasten the memory card reader with the screws (2).
► Connect the cables to the memory card reader and to the mainboard.
Make sure the polarity is correct.
► Close the casing (see

Removing the memory card reader

► Open the casing (see
► Disconnect the cables connected to the memory card reader.
► Remove the screws (1).
► Slide the memory card reader out of the casing in the direction of the arrow (2).
► Install a blind cover in the drive bay.
► Close the casing (see
Fujitsu Technology Solutions
"Closing the casing", Page
"Opening the casing", Page
"Closing the casing", Page
2 2
1
36).
35).
1 1
2
36).
System expansions
45