Removing A Board - Fujitsu CELSIUS W410 Operating Manual

Removing a board

► Open the casing (see
Board
► Disconnect the cables connected to the board.
1
► Swivel the retaining clamp (1) around towards the back wall of the device.
Boards in the PCI-Express x16 slot are additionally secured to the slot at the
bottom with a plastic catch. Push the plastic catch to the side to release the
card. You can then remove the card as described below.
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
Fujitsu Technology Solutions
"Opening the casing", Page
2
35).
System expansions
51