Installing A Hard Disk Drive - Fujitsu CELSIUS W410 Operating Manual

Installing a hard disk drive

► Open the casing (see
► Secure the EasyChange rails to the side of the hard disk drive by inserting the upper
pins of the EasyChange rail in the corresponding holes of the hard disk.
► Slide the hard disk drive with the EasyChange rails into the drive cage in the direction of the arrow
(1). Check that the component side of the hard disk drive faces inwards towards the casing floor.
► Connect the cables to the hard disk drive.
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.
Fujitsu Technology Solutions
"Opening the casing", Page
1
"Closing the casing", Page
35).
36).
System expansions
47