Connecting The Keyboard - Fujitsu CELSIUS W410 Operating Manual

Connecting the keyboard

Depending on the equipment level selected, your device will be supplied with
a USB keyboard or a PS/2 keyboard.
Connecting, Keyboard,
Connecting a USB keyboard
Use the supplied keyboard cable only.
Connecting, USBport,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into one of the device's USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
Connecting, ConnectingaPS/2keyboard
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is switched off and then switch the device on again.
► Switch your device off.
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Keyboard,
► Switch your device on again.
Fujitsu Technology Solutions
Getting started
17