Installing And Removing A Wlan Module (Optional); Installing The Wlan Module - Fujitsu FUTRO S700 Operating Manual

System expansions

Installing and removing a WLAN module (optional)

You can install an additional WLAN module in your device.
Alternatively, you can install a Power over Ethernet module in the same
slot. You can only install one of the modules.

Installing the WLAN module

WLANmodule
► Open the casing (see
► Break the cover (1) out of the casing.
► Place the WLAN module in the casing with the component side facing downwards and push it
in the direction shown by the arrow (2) through the opening in the back of the casing.
► Secure the WLAN module with the screws (3).
► Connect the cable of the WLAN module to the connector on the mainboard (4).
Fujitsu Technology Solutions
"Opening the casing", Page 20 -
3
1
English).
4
3
2
English - 23
59