Brake Lever Lubrication - Victory Motorcycles Hammer 2010 User Manual

Brake Systems

Brake Lever Lubrication

Lubricate at the intervals recommended in the periodic maintenance table beginning on page 70.
1. Remove the right side mirror.
2. Remove the brake lever pivot nut (10 mm wrench or socket) and pin (4 mm hexagonal wrench).
Tip: Note the direction the plunger is installed (if removing). Proper direction is critical for brake function.
3. Remove any old grease and dirt from the lever and housing.
4. Lubricate the lever and pivot pin with VICTORY All
Purpose Grease or equivalent.
5. Reinstall the lever and pivot pin.
Torque: 52 in-lbs (6 Nm)
6. Reinstall the pivot nut.
Torque: 52 in-lbs (6 Nm)
7. Check front brake lever movement. See page 48.
8. Reinstall the right side mirror and adjust.
Maintenance
Large diameter end
toward lever
105