Sidestand Lubrication - Victory Motorcycles Hammer 2010 User Manual

Maintenance

Sidestand Lubrication

1. Secure the motorcycle in a fully upright position using an appropriate motor-
cycle lift or a block of wood or steel placed securely under the frame.
2. Move the sidestand upward to its stored position.
CAUTION! Wear face protection. The sidestand return spring is under tension and can
injure your eyes and face when released.
3. Hold the nut and remove the sidestand pivot bolt and sidestand return spring.
Wipe any old grease and dirt from the sidestand, frame and pivot bolt.
4. Lubricate the sidestand, the pivot bolt and the ends of the spring with
VICTORY All Purpose Grease or equivalent.
5. Reinstall the sidestand spring and place the sidestand on the mounting boss
with the stand in the stored (up) position. Install the pivot bolt and tighten it while holding the nut.
Torque: 35 ft-lbs (47 Nm)
6. Verify that the sidestand moves freely through its pivot range.
122