Victory Motorcycles Hammer 2010 User Manual page 109

Maintenance
Gear Shift Pedal
Do not remove and reposition the shift arm on the shift shaft
to adjust gear shift pedal height. A 90_+/-5_ angle between
the shift arm and the linkage rod is necessary to ensure correct
shift linkage operation.
1. Loosen the gear shift linkage rod lock nuts.
2. Turn the linkage rod inward or outward as necessary.
90
_
3. Tighten the linkage rod lock nuts.
4. Check the gear shift pedal height.
Wheels
Inspect both wheels for cracks or damage and replace dam-
Shift Linkage
aged wheels promptly. Do not operate the motorcycle if
Rod
Lock
wheels are damaged or cracked. See the VICTORY Service
Lock
Nut
Manual or your authorized VICTORY dealer.
Nut
107