Emergency Flasher Switch; Starter Button; Front Brake Lever; Throttle Control Grip - Victory Motorcycles V92C Owner's Manual

Emergency Flasher Switch

The emergency flasher switch activates and cancels the emergency flashers. When the emergency
flashers are active, all of the turn signals flash. To activate the emergency flashers, slide the switch to
the left; to cancel the flashers, slide the switch to the right.

Starter Button

To engage the engine starter motor, press the right side of the starter button. The starter button works
only when the engine stop/run switch is in the Run position, and the transmission is in Neutral or the
clutch is disengaged.
For complete engine starting procedures, see "Starting the Engine," page 60.

Front Brake Lever

To apply the front brake, pull the front brake lever toward the handlebar.
For braking procedures in various riding conditions, see "Braking," page 66.

Throttle Control Grip

The throttle control grip controls the engine speed. To increase engine speed, twist the throttle control grip
toward you; to decrease engine speed, twist the grip away from you. When you release the grip, it returns to
the idle speed position.
Multi- -Function Display (MFD) Mode Button
Use the MFD Mode button in conjunction with the MFD Set button to control the features of the
multi- -function display (see page 34).
Instruments and Controls
41