Throttle Freeplay - Victory Motorcycles Hammer 2010 User Manual

Pre-Ride Inspections
Throttle
1. Rotate the throttle control grip. It should rotate
smoothly from the rest position to the completely open
position. It should return to the rest position quickly
when released.
2. Remove the right side access cover. Inspect throttle
cables for frayed ends.
3. Service the throttle system if throttle operation is not
smooth, if throttle grip does not return properly, or if
cable ends are frayed. See the VICTORY Service
Manual or your authorized VICTORY dealer.

Throttle Freeplay

Throttle freeplay is the amount of throttle control grip
movement from the rest position to the point of cable resis-
tance. Measure this distance. Freeplay should be 2-4 mm.
Adjust throttle freeplay as needed. See page 97.
52
2-4 mm
Access
Cover
Throttle
Cable Ends