Table of Contents
Advertisement
Filler Plug
5347M-0507-090E
HST (Hydrostatic Transmission) Fluid
• HST is a very delicate mechanism, and contamination of ten-micron-order
particles can damage it. When it is necessary to work on an HST, work in a
clean and dust-free environment, and make sure dust or dirt do not enter its
circuit.
NOTE
• To obtain correct reading, check HST fluid level before starting, or wait until HST
fluid cools off sufficiently. Hot HST fluid expands in volume and does not provide
correct reading.
• When oil is sufficiently cooled and is at the [MIN] level, its amount is sufficient.
• Do not exceed beyond [MAX] level. HST fluid may expand and overflow.
• Change HST oil once a year or every 500 hours, whichever comes first.
• Oil to use and capacity: Page 46.
Maintenance
NOTE
5.
6.
7.
8.
9.
10. Install right front step.
Front Wheel
Axle (Right)
• Drain plug for the right front knucle is on
the back side of the front axle.
Install both drain plugs back in place.
Remove right front step.
Remove oil filler cap.
Fill specified amount of oil into filler.
Install filler plug back in place.
-61-
5
Hide quick links:
Advertisement
Table of Contents
