Operation - CanyCom CMX 227 Operator's Manual

1

Operation

This machine is intended for cutting grass and bushes. Any other use may pose hazard or
cause damage to the machine.
The stability of the machine is affected by the speed, rate of steering, terrain and the
operator's weight. Always pay close attention to these factors or a loss of control or tip over
could occur, resulting in property damage, serious injury or death.
General Driving
• Do not operate the engine in a confined space where dangerous carbon monoxide fumes
can accumulate.
• Do not touch the engine, muffler or exhaust pipe while the engine is running or soon after
it has stopped. These areas will be very hot and can cause burns.
• Do not operate the machine under the influence of alcohol or drugs. Do not operate the
machine when you are tired, ill, or not feeling well.
• Always check for obstacles before operating on new terrain. This includes overhead
obstacles such as the branches of a tree.
• Before starting the engine and moving the machine, scan around your surroundings and
make sure all persons and other vehicles are a safe distance away from the machine.
• On a slippery surface, travel slowly and exercise caution to reduce the chance of skidding
or sliding out of control. Never operate on ice.
• Always make certain that there is no obstacle or a person behind the machine when
backing up. After confirming that it is safe to back up, move slowly and avoid sharp turns.
• To reduce the risk of tip over, pay special attention when encountering an obstacle or a
slope, or when braking on a slope or during a turn. See Driving on a Slope on page 8.
• Never attempt to drive over a large obstacle such as rock or fallen tree.
Safety
-6-