Table of Contents
Advertisement
Cutting System
• Stop engine and remove ignition key when servicing.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.
Cutting Blades
• When a blade is damaged, replace it and the other blade immediately. Always
replace blades in pair. Damage due to vibration may occur.
• When replacing blades, always replace both blades. Replace blade pins and
wave washers also.
• When a foreign object is tangled with the blade, immediately stop the engine
and remove the foreign object. Damage due to vibration may occur.
• When replacing blades, inspect blade stay. If stay is worn beyond wear
limit, damaged or deformed, replace it immediately. Contact your CANYCOM
representative.
• Blades and blade stay can become sharp due to wear. When handling blade or
blade stay, always wear thick gloves and handle carefully. Injury may occur.
• When replacing a blade, do not force it to remove. Blade can move suddenly,
causing injury. When it is difficult to remove, clean blade and remove foreign
object. Turn blade back and forth to remove.
Maintenance
-67-
5
Hide quick links:
Advertisement
Table of Contents
