Head Lamp - CanyCom CMX 227 Operator's Manual

Front Cover
5332M-0401-140E

Head Lamp

Tray
5332M-0509-030E
5347M-0509-040E
5332M-0509-060E
Maintenance
Clip
Rod
Knob Bolt
Fixing Bracket
Flange Bolt
Head Lamp Unit
Grommet
3. Raise steering wheel to the maximum angle
and fit clip on the back of front cover to rods.
4. Fit upper part of front cover.
NOTE
• Beware not to catch front cover by the
plates on both sides when you installing
front cover.
1. Remove front cover.
2. Remove 2 knob bolts fixing the tray.
3. Remove fixing bracket and lift tray.
4. Remove 2 flange bolts fixing head lamp unit
to remove head lamp unit.
5. Insert projections at the bottom of head lamp
unit into holes of grommet on bumper and
install it in reverse order.
-51-
5