Parking Brake - CanyCom CMX 227 Operator's Manual

5

Parking Brake

• Always keep brake adjusted for maximum performance. Improperly adjusted
brakes may result in property damage, serious injury, or death.
1. Park machine on level ground.
2. Remove left step.
Adjust Nut
Lock Nut
5347M-0507-070E
Lock Nut
Spring
Adjust Nut
Drive Belt
5347M-0507-080E
Maintenance
Rear Brake
3.
4.
5.
6.
NOTE
• If brake does not work even the brake pedal
is locked, the brake shoe is worn out. Please
contact your CANYCOM representative for
replacement.
Front Brake (AWD Models)
7.
A
8.
9.
NOTE
• AWD Models: CMX227H, CMX186H
-66-
Loosen lock nut
Adjust brake with adjust nut so that the brake
does not drag when brake pedal is free.
Adjust brake so that the brake works and the
brake pedal locks securely when brake pedal
is locked
Tighten lock nut.
Lock brake pedal and inspect that the strech
of spring is between 5mm and 8mm. If it is
not within this range, adjust it with adjust nut.
Tighten lock nut after adjustment
Install left step back in place.