Fujitsu SPARC ENTERPRISE T5440 User Manual page 41

ILOM-Related Issues on the SPARC Enterprise T5440 Server (Continued)
TABLE 3-4
CR ID Description
6712695 In the ILOM CLI, the /SP/powermgmt object
display properties describing the current state of
the system (actual_power,
permitted_power, and available_power).
The properties describing the current state of the
system are accurate.
There are additional properties describing the
configuration of power management (control,
policy, regulated_budget,
elastic_budget). The SPARC Enterprise
T5440 server does not support the configuration
of power management, so these properties are
not relevant.
6760139 ILOM firmware and OpenBoot PROM (OBP)
setting information may not be inherited during
motherboard replacement.
Workaround
Ignore, and do not attempt to modify, the
control, policy, regulated_budget, or
elastic_budget properties of the
/SP/powermgmt object. Attempts to modify
these properties will result in an error message.
If an ILOM firmware initialization has been
performed or any of the firmware settings have
been changed, follow the procedure below to
save the latest ILOM firmware setting
information. After replacing the motherboard,
set the saved setting information again.
(Procedure for saving ILOM firmware setting
information)
1) Log in to ILOM, execute the following
commands, and save the displayed results:
-> show /SP -level all -o table
-> show /SYS -o table
-> show /HOST -level all -o table
Log in to the ALOM CMT compatibility shell,
execute the following command, and save the
displayed results:
sc> showsc
Chapter 3 Known Issues 31