On-Board Network Port Disabled By An Xaui Card - Fujitsu SPARC ENTERPRISE T5440 User Manual

Hardware and Mechanical Issues on the SPARC Enterprise T5440 Server (Continued)
TABLE 3-1
CR ID Description
n/a When the system is initialized, firmware is
loaded and occupies approximately 128 MB to
352 MB of the host memory. The banner and
other software utilities report an amount of
memory minus the amount of memory that is
occupied by firmware.
On-Board Network Port Disabled By an XAUI
Card
A 10GbE XFP XAUI Adapter Card (XAUI card) in slot 4 disables on-board network
port 1 (NET1). The XAUI card in slot 5 disables on-board network port 0 (NET0).
FIGURE 3-1
Slot 0
TABLE 3-2
On-board Network
NET 0
NET 1
XAUI Cards and On-board Network Ports
1 2 3
One-way only
Network Ports and Device Names
XAUI Slot
XAUI 1
XAUI 0
Workaround
When viewing the amount of memory in the
banner, be aware that the banner reports the
amount less what is used by the firmware.
4 5 6
XAUI1
XAUI0
One-way only
NET NET
2
NET
NET
0
Device Name
nxge0
nxge1
Chapter 3
7
3
1
On-board
Network port
Known Issues 23