KVH Industries TracVision G8 Owner's Manual page 30

TracVision G8 Owner's Manual - Guide to Technical Information
Be sure to properly align the
data/power cable with the
baseplate connector before
tightening. Connecting the cable at
an angle may damage the cable's
center tines.
28
Figure 2-6 Baseplate Connectors
RF3 RF1
10. Connect the N-type connector end of the data/power
cable to the baseplate, as shown in Figures 2-7 and 2-8.
Figure 2-7 Data/power Cable Connectors
To MCU
F-type Connector
Figure 2-8 Connecting the Data/Power Cable
RF2 RF4
Data/Power
N-type Connector
To Antenna
54-0198