Table of Contents
Advertisement
DISH Network
™
(EchoStar) and ExpressVu Satellite Subscribers
DISH Network and ExpressVu subscribers will need to use the
MCU switching option, as described in "Switching Satellites Using
the MCU."
Latin America
In Latin America, including Mexico, satellite switching is
unnecessary because programming is broadcast from a single
satellite.
Switching Satellites Using the MCU
If you're unable to switch between satellites using the receiver's
remote control, use the MCU front panel buttons to select
between Satellite A and Satellite B. Press the left button to select
Satellite A and the right button to select Satellite B.
Figure 3 Switching Satellites Using the MCU
Tracking <SAT NAME>
Sat A
Track Installed
Satellite A
54-0198
Menu
Sat B
Track Installed
Satellite B
Guide to Operation
Europe only:
Using the MCU to switch between
satellites disables the system's
DiSEqC monitoring. You will not be
able to use the receiver/remote to
switch between satellites unless the
system is restarted.
7
Advertisement
Table of Contents
Troubleshooting
