Table of Contents
Advertisement
Configure Longitude of a User-configurable Satellite
Function:
configures one of the user-configurable satellites
with the longitude provided
Command:
SATCONFIG,USERX,YYY,Z,D,L
Response:
if valid pair, echoes the input data
if invalid pair, returns error message
Where:
X = 1 or 2
YYY = longitude (0-180)
Z = E (East) or W (West)
D = decoding type (0 = test, 1 = DSS-A,
2 = DSS-B, 3 = DVB)
L = LNB polarization (C = circular, L = linear)
D.8 Debug Commands
Report Offset Angles
Function:
reports system offset angles
Command:
OFFSETS
OFFSETS,XXXXX,YYYY
Response:
Offsets = XXXXX.X XXXXX.X
Where:
X = new azimuth offset (-1800 - 1800)
Y = new elevation angle (-450 - 450)
Install Default Satellites
Function:
Installs predefined satellite pairs
Command:
SATPAIR,X
Response:
displays numerous frequency commands and
reports "Satellite Installation Complete"
Where:
X = 0 (satellites default to Astra1 & Hotbird)
or
X = 1 (satellites default to Echo_119 & Expressvu)
or
X = 2 (satellites default to DSS_101 & DSS_119)
or
X = 3 (satellites default to Galaxy3CN & None)
or
X = 4 (satellites default to PAS_9 & None)
54-0198
Maintenance Port Antenna Commands
137
Advertisement
Table of Contents
Troubleshooting
