Table of Contents
Advertisement
An Example of Configuring a User-defined Satellite (Europe)
The following is an example of configuring the fictional
YOURSAT 123 as the USER1 configured satellite. Prior to
configuring this satellite or any others, be certain to get the most
up-to-date information from one of the sources previously
discussed.
Yoursat 123 at 7 West, DVB Decoder, Linear Polarization LNB
Horizontal High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical High
Frequency
Symbol Rate
FEC Code
Network ID
Vertical Low
No Data Listed
Horizontal Low
No Data Listed
Based on this information, the data entered via the PC would
look like this:
SATCONFIG,USER1,7,W,3,L
@DEBUGON
@SATCONFIG,A,98,11966,27500,34,0x0800,H,H,3
@SATCONFIG,A,98,11823,27500,34,0x0800,V,H,3
@SATCONFIG,A,98,00000,27500,34,0x0000,V,L,3
@SATCONFIG,A,98,00000,27500,34,0x0000,H,L,3
@SAVE,A
ZAP
To install and start tracking the USER1 satellite, the following
additional data would be entered:
HALT
SATINSTALL USER1,NONE
@L,A
ZAP
54-0198
11.966 GHz
27500
3/4
2048 (dec) = 0x0800
11.823 GHz
27500
3/4
2048(dec) = 0x0800
Installation
51
Advertisement
Table of Contents
Troubleshooting
