Optional Rotating Card Display; Appendix E Optional Rotating Card Display - KVH Industries KVHTRACVISION G4 Technical Manual

Satellite television

Table of Contents

Appendix E

Optional Rotating Card

Display

The optional rotating card display presents true or magnetic

heading using a compass card rotating under a fixed lubber line,

with user-selectable red or green backlighting.

E.1

Specifications

Dimensions

5.6" (142 mm) x 5.6" (142 mm) x 3" (76 mm)

Weight

39 oz (1110 gm)

E.2

Mounting the Rotating

Card Display

The rotating card display may be mounted either of two ways:

Option 1 - Free-standing on its Bracket

Option 2 - Flush with the Panel

Templates for either method are provided at the end of this

appendix. The unit should be located no closer than 36" (1 m) to

any magnetic compass. Before installing, remove the display unit

from its stand by removing the latch knobs on either side.

Option 1 - Bracket Mounting

1. Select a site with room for the unit to rotate in its

bracket. Using Template E-1, mark and drill four

⁄

" (6 mm) holes in the mounting surface. Fasten

the bracket in place with the screws provided.

2. Reattach the display unit to the bracket

temporarily. Skip to Section E.3, "Wiring the

Rotating Card Display" on the following page.

54-0147