Setup Display Mode - KVH Industries KVHTRACVISION G4 Technical Manual

3.3

Setup Display Mode

The Setup Display mode selects the data that will be displayed
on the ADCU LCD after startup and self-test; it does not control
the data sent to remote heading display units, north-up radars,
autopilots, etc.
New Data Display
Magnetic Heading
Compass screen
determined by
availability of GPS
data for True North.
Mag/HDG
###.#°
Pitch Roll
#.#° #.#°
Mag/Hdg
#.#°
Lat:
Long:
Tracking <Sat Name>
###.#°
Antenna screen
determined by
Antenna Initializing
availability of
No Data from Antenna
TracVision G6 and
time in the startup
Antenna Initializing
sequence
waiting for POS Data
54-0147
Enter
ALERT SCREENS
###.#°
True/HDG
###.#°
Yaw
#.#°
Rate/Sec
#.#°
##°
##°
##.#° ####
Setup display type?
Next Return
compass?
Yes Next Return
Pitch, Roll & Yaw?
Yes Next Return
Rate of turn?
Yes Next Return
Latitude Longitude?
Yes Next Return
Antenna display?
Yes Next Return
Using the ADCU Interface
Figure 3-9
Setting Display
Proceed to Section 3.4,
"Set Data Outputs Mode"
This menu will not appear if
GyroTrac is configured to
operate as a stand-alone
system.
67