KVH Industries KVHTRACVISION G4 Technical Manual page 87

TracVision G4 Technical Manual
Figure 3-19
Selecting the Default Display
If the main display is set to show
antenna tracking information but
the antenna communications are
OFF, the following display will be
shown:
TV comms is off
No data from antenna
To correct the error, turn antenna
communications ON or change the
main display setting.
Figure 3-20
Selecting TracVision or
GyroTrac-only Operations
76
Choosing the Default Display
This option resets the ADCU display settings to their factory
defaults (i.e., compass, 50 percent brightness).
Default display box?
Yes Next
ALERT SCREENS
Display defaulting
Please Wait
Default display done
Selecting TracVision or GyroTrac-only Operations
GyroTrac's factory default configuration is to operate as a stand-
alone system (Antenna Comm: OFF). Connecting a TracVision
antenna will reconfigure GyroTrac to function as a component of
a TracVision system (Antenna Comm: ON).
Set TV com On/Off?
Yes Next
Antenna Comm is: ON
On ENTER
Return
Proceed to "Selecting
TracVision or GyroTrac-only
Operations"
Return
Return to "Setting Display
Brightness"
Off
The antenna communication
setting will blink "ON" or "OFF"
based on current selection. ON
allows GyroTrac to function as
a TracVision system
component. Pushing the ON
and OFF buttons will change
the selected setting.
54-0147