KVH Industries KVHTRACVISION G4 Technical Manual page 139

3. Refer to Figure E-3 below; connect the power and
data wires to the terminal block as listed in
Table E-1.
1 2 3
Term. # Function
1 Output B (linked to terminal 5)
2 Output A (linked to terminal 6)
3 Shield for output cable
4 Shield for input cable
5 Input B (NMEA 0183 data)
6 Input A (NMEA 0183 data)
7 11-40 VDC NEG (-)
8 11-40 VDC POS (+)
4. Set the jumpers as shown in Figure E-4 to select
red or green night illumination.
1
Red
2
Black
Power
Supply
Plug
ILLUMINATION JUMPERS
54-0147
4 5 6 7
PC BOARD CONNECTORS
BACKPLATE GASKET
(Red) (Green)
8
4
Red
3
Blue
NMEA
Data
Plug
Optional Rotating Card Display
Figure E-3
Rotating Card Display – Terminal
Strip Wiring
Table E-1
Rotating Card Display – Terminal
Strip Wiring Details
Figure E-4
Rotating Card Display –
PC Board Jumpers and Connectors
137