Rotating Plate Shipping Restraint (1 of 2)
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
14. Place the radome onto the baseplate (labels facing
the sides of the vehicle) and secure in place using
the 8 pan head screws and flat washers removed
in
Step
9.
15. Drill the cable access hole (marked in
vehicle's roof.
54-0196 Rev. A
Installation Bolt and Washer
Step
Figure 2-9
Rotating Plate Shipping
Restraint Storage
Figure 2-10
TracVision S2 Shipping Restraints
(Storage Position)
Forward
Shipping Restraint
4) in the
Installation
2-7