KVH Industries KVHTRACVISION G4 Technical Manual page 91

TracVision G4 Technical Manual
Figure 3-26
Antenna Status Data Screens
Test Types
Azimuth Motor
Elevation Motor
Antenna Gyro
External Sensor
IRD Comms
RF Comms
RF Signal
80
Antenna Status Data Screens
These screens are only seen if Antenna Comm is turned ON.
Figure 3-26 shows the information available through the Get
Antenna Status mode. The Skew Angle and Bit Error rates are
only available when the GyroTrac ADCU is connected to a
TracVision G4.
Get Antenna status?
Enter Next
ALERT SCREENS
Get system errors?
Yes Next
(If errors detected)
No errors detected
Testing OK
OR
Test <Test Type>
Testing Failure
Push any Button to Proceed
Get Version?
Yes Next
Antenna type = TVX
Antenna Ver = X.XX
Push any Button to Proceed
Get serial number?
Yes Next
Antenna serial #
########
Push any Button to Proceed
Return
Return
Signal level =
Threshold =
Push any Button to Proceed
Return
Skew angle
##.#
Push any Button to Proceed
Return
Bit error rate
###
Push any Button to Proceed
Proceed to Section 3.8
"Control Antenna Mode"
Get Thres/sig level?
Yes Next Return
Get skew angle?
Yes Next Return
Get bit error rate?
Yes Next Return
54-0147