KVH Industries KVHTRACVISION G4 Technical Manual page 100

Sat frequency Scan?
Yes Next
Symbol Rate: XXXXX
- Enter
Set FEC Code: X/X
- Enter
Scan frequencies
Please Wait
Update frequency?
YES
Updating frequency
Please wait
Restart antenna?
YES
Restart
Antenna
System
54-0147
Return
Return to "Manually Controlling the
Antenna"
+
Use the -/+ keys to select each
number. Selecting ENTER will cycle
through each digit and then launch
the FEC code screen.
(Valid settings are 01000-39999.)
+
Use the -/+ keys to scroll through
the available FEC codes:
1/2 - 2/3 - 3/4 - 5/6 - 6/7 - 7/8.
Use the ENTER key to accept your
selection.
This scan may take up to
10 minutes to complete.
NO
If no strong satellite signal is found
at the selected frequency, the
screen will display:
No strong frequency
Exit returns you to the "Sat
Frequency Scan" screen. Try the
process again, but using a different
symbol rate or FEC code.
NO
Figure 3-35
Satellite Frequency Scan
To find a valid symbol rate and FEC
code, refer to an up-to-date satellite
table either in a magazine or on the
Internet. For your convenience, this
data is available (for the system's
predefined satellites) on our web
site at www.kvh.com/footprint.
The vessel must remain stationary
during this process.
Exit
Using the ADCU Interface
89