Newborn Inlay; Infant Insert - CYBEX ATON Owner's Manual

Newborn Inlay

The Newborn Inlay is a specially designed EPS foam
component located in the bottom of the Infant Carrier
underneath the Seat Cover. The Inlay helps to position
smaller babies properly in the Aton during their rst few
months. We recommend using the Newborn Inlay until
your child is 11 lb (5 kg) (about 3 months old).
Removing the Newborn Inlay
At the bottom of the seat there is an opening in the seat
cover. Simply lift up and remove the Newborn Inlay from
the seat. Keep it for future use.

Infant Insert

To ensure a better t for infants, we recommend using the
Aton Infant Insert. The Insert will give more stability to the
head and upper torso, as well as provide a better Harness
t for smaller babies. We recommend using the Infant
Insert until 22 lb (10 kg) or until child needs more room.
Folding the Insert
If you child's shoulders are below the rst set of Harness
Slots, you may fold the lower portion of the Infant Insert
UNDER to boost the child up for proper Harness t. Unfold
the Insert when the child's shoulders are at the height of
the second set of Harness Slots.
Removing the Infant Insert
Follow the steps for Adjusting Harness Height on page 13.
NEVER place extra padding under or behind the
child. The Infant Insert is the only approved padding
to be used with the Aton.
16
Using the Infant Carrier