Washing Instructions; Harness Straps; Cleaning - CYBEX ATON Owner's Manual

Spot Cleaning
Spot clean Seat Covers, Shoulder Pads, Buckle Pad, and the Infant Insert as needed with a clean cloth
using mild detergent and water.

Washing Instructions

Seat Cover, Shoulder Pads, Buckle Pad, and the Infant Insert may be washed as follows:
Machine wash cold, gentle cycle, mild detergent
Do not bleach
Do not tumble dry
Line dry
Do not iron

Harness Straps

Sponge clean using warm water and mild soap. Air dry. Do not iron.
or Harness components from Infant Carrier. If Harness is extremely soiled or damaged, call for a
replacement. NEVER use bleach, household cleaners or solvents.
Harness Buckle
Sponge clean or thoroughly rinse Harness Buckle with warm water. Test by fastening and unfastening
until an audible CLICK is heard after inserting each buckle Tongue into the Buckle. If CLICKS are not
heard, repeat the cleaning procedure.
NOT lubricate.
LATCH Connectors
Sponge clean or thoroughly rinse LATCH Connectors with warm water. Test by connecting and
disconnecting until an audible CLICK is heard after connecting each connector to a lower LATCH
anchor. If clicks are not heard, repeat the cleaning procedure.
cleaners or solvents. DO NOT lubricate.
Plastic Parts
Wipe clean with mild detergent and warm water.
solvents.
Care and Cleaning
NEVER use bleach, household cleaners or solvents. DO
NEVER use bleach, household cleaners or
NEVER remove Harness
NEVER use bleach, household
39