SMART Board 6000 series User Manual page 46

APPENDIX A
USING THE ON-SCREEN DISPLAY MENU
Option
Setup
Power Save
Setup Reset
Factory Reset
About
Model Number
Serial Number
Scalar firmware version
Touch firmware version
OPS Information
38 smarttech.com/kb/170642
Values Function
On Enables or disables Power Save
mode
Off
[N/A] Restores the setup settings to their
default value
[N/A] Resets options in all menus to their
default values
[N/A] Displays the interactive flat panel's
model number
[N/A] Displays the interactive flat panel's
serial number
[N/A] Displays the interactive flat panel's
scalar firmware version
[N/A] Displays the interactive flat panel's
touch firmware version
[N/A] Displays whether the OPS is
installed
Notes (if any)
When Power Save mode is enabled
and there isn't video input, the
interactive flat panel displays
No Signal for 25 seconds before
turning off.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.